Operations Manual

.223 CALIBER

LUBRICATING GUIDE

LUBRICATING

Upper Receiver

LIGHTLY LUBE:

BORE & CHAMBER, OUTER

SURFACES OF BARREL AND

FRONT SIGHT, SURFACES UNDER HANDGUARD, DEPRESS FRONT SIGHT DETENT SEVERAL

TIMES TO WORK LUBE INTO THE SPRING.

Bolt Carrier Group

START AT

RECEIVER

GO RIGHT THROUGH

THE COMPENSATOR

(DON’T REVERSE DIRECTIONS

IN BORE)

Lightly Lube - A film of oil barely visible to the eye.

Generously Lube - Heavy enough so that it can be spread with the finger.

Remember to remove excessive oil from the bore before firing.

DRY WITH PIPE CLEANER,

THEN PLACE ONE DROP OIL

CARRIER KEY

LIGHTLY LUBE CHARGING HANDLE,INNER

AND OUTER SURFACES OF BOLT CARRIER.

GENEROUSLY LUBE SLIDE AND CAM PIN

AREA OF BOLT.

GENEROUSLY LUBE OUTSIDE

OF THESE PARTS

MAKE CERTAIN TO GET CAM PIN

AREA, PISTON RINGS, AND OUT-

SIDE OF THE BOLT BODY.

CAUTION

Lightly lube fir-

ing pin and firing

pin recess in bolt.