Operations Manual

.30 CALIBER

CLEANING

Lower Receiver

• Clean areas of powder fouling, corrosion and dirt.

• Wipe dirt from trigger mechanism.

• Clean buffer and inside lower receiver extension.

CAUTION: Do not use wire brush or any type of abrasive material to clean aluminum

surfaces.

Bolt Carrier Group

CLEANING

Bolt Carrier Group

• Outer & inner surfaces of bolt carrier. (Photo 33-A)

• Carrier key. (Photo 33-A)

•Firing pin recess and firing pin. (Photo 33-B)

•Firing pin hole (Use pipe cleaner)

• Carbon deposits & dirt from locking lugs. (Photo 33-C)

• Areas behind bolt ring and under lip of extractor. (Photo 33-D)

NOTE: There is no rubber tip inside the extractor spring.

33-A

33-B 33-C 33-D

Firing Pin Retaining Pin-(308-BT-16)

Cam Pin-(308-BT-17)

Extractor Pin-(308-BT-03)

Firing Pin-(308-BT-14)

Extractor-(308-BT-07)

Bolt Carrier-(308-BT-12)

Bolt-(308-BT-02)

Bolt Carrier Key-(BT-11)

Bolt Carrier Key Screw-(BT-10)

w/Extractor Spring-(308-BT-08)