Operations Manual

.22LR CALIBER

LOADING THE RIFLE

Make sure the rifle is pointed in a safe direction and the safety is engaged at all times while loading

the rifle.

NEVER allow your fingers or other objects to contact the trigger while loading or unloading the rifle.

Do NOT disengage the safety until you are ready to fire and have the rifle pointed safely downrange.

1. Ensure that the selector is in the “SAFE” position. (Photo 23-A)

2. With the bullets facing forward, insert loaded magazine into magazine well and push

it in until it stops and is retained by the magazine catch. Tap the bottom of the

magazine in an upward motion to ensure that the magazine is seated tight.

(Photo 23-B) (Photo 23-C)

3. With the rifle pointed in safe direction pull all the way back on the charging handle

and return it to the fully forward locked position to cock the hammer and feed a

round into the chamber. The rifle is now loaded with a round in the chamber and the

hammer cocked. (Photo 23-D) (Photo 23-E)

4. Make sure safety selector is still on safe. (Photo 23-F)

UNLOADING THE RIFLE

1. Set selector to “SAFE” position. (Photo 23-G)

2. Press magazine catch button and remove magazine. (Photo 23-H)

3. Pull charging handle completely to the rear. If a round had been in the chamber it

should have been ejected. Make sure to visually check to make sure that the

chamber is empty. After visual inspection of the chamber, allow the bolt forward to

the closed position. (Photo 23-I)

23-A 23-B 23-C

23-F23-D 23-E

23-H

23-I

23-G