Operations Manual

.223 CALIBER
ASSEMBLY
18
1. Insert spring and
buffer.
3. Push in extractor pin.
4. Slide bolt into carrier.
WARNING
Don’t switch bolts between rifles.
2. Insert extractor and spring.
New extractor has a silicone insert w/spring.
Be sure not to lose it. If the spring comes
loose, put the large end of spring in the
extractor and seat.
STAGGER RING GAPS TO
STOP GAS LOSS
7. Pull bolt back.
8. Replace retaining pin.
5. Replace bolt cam pin.
6. Drop in and seat.
FIRING PIN
NOTE
Firing pin should
not fall out when
bolt carrier group
is turned upside
down.
WARNING
Be sure that the cam pin is
installed in the bolt group. If it
isn’t, your rifle can still fire and
will explode.