Quick Start Guide

Specifications
Directional pattern
Supercardioid, lobe-shaped
Principle of operation
Pressure gradient, with interference tube
Cartridge type
Pre-polarized condenser
Frequency range
20 Hz - 20 kHz
Frequency range, ±2 dB
70 Hz - 20 kHz at 60 cm (2 ft)
Sensitivity, nominal, ±2 dB at 1 kHz
19 mV/Pa; -34.4 dB re. 1 V/Pa
Epuivalent noise level, A-weighted
Typ. 14 dB(A) re. 20 µPa (max. 15 dB(A))
Switchable filters
High boost, low cut
Output impedance
< 150 Ω
Output balance principle
Signal balanced
Common Mode Rejection Ratio (CMRR)
> 40 dB
Power supply
48 V Phantom power (±4 V)
Current consumption
4.5 mA
Polarity
+V at Pin 2 for positive sound pressure
Connector
XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Weight
68 g (2.4 oz)
Operating temperature range
-40 to 45°C (-40 to 113°F)
Relative humidity
Up to 90%