Data Sheet

Page 2 of 3
4006-TLX, 4006-TLX Microphone Upgrade for 4006-TL
Directional characteristics:
Omnidirectional
Principle of operation:
Pressure
Cartridge type:
16 mm (0.63 in) pre-polarized condenser
Frequency range, ± 2 dB:
15 Hz - 20 kHz
Sensitivity, nominal, ±2 dB:
35 mV/Pa; -29 dB re. 1 V/Pa
Equivalent noise level A-weighted:
Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
Equiv. noise level ITU-R BS.468-4:
Typ. 27 dB (max. 29 dB)
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):
79 dB
Total harmonic distortion (THD):
<0.5% THD up to 129 dB SPL peak, <1% THD
up to 135 dB SPL peak
Dynamic range:
Typ. 120 dB
Max. SPL, peak before clipping:
143 dB
Output impedance:
<200 ohm
Cable drive capability:
Up to 100 m (328 ft)
Power supply:
Phantom P48
Connector:
3-pin XLR-M (Standard P48)
Weight:
150 g (5.29 oz)
Capsule diameter:
16 mm (0.63 in)
Microphone length:
165 mm (6.5 in)
Operating temperature range:
-40 to +70° C (-40 to 158° F)
Diagrams
4006-TLX, 4006-TLX Microphone Upgrade for 4006-TL
On-axis and diffuse-field responses of DPA 4006-TL and 3506
with the Diffuse-field Grid DD0297 fitted.
On-axis and diffuse-field responses of DPA 4006-TL and 3506 with the Diffuse-field Grid
DD0297 fitted.
On-axis response of DPA 4006-TL with Close-miking Grid
DD0254
On-axis response of DPA 4006-TL with Close-miking Grid DD0254
On-axis and diffuse-field responses of DPA 4006-TL and 3506
with the Near-field Grid DD0251 fitted.
On-axis and diffuse-field responses of DPA 4006-TL and 3506 with the Near-field Grid
DD0251 fitted.
Diffuse-field response of DPA 4006-TL and 3506 with Nose Cones
UA0777 fitted.
Diffuse-field response of DPA 4006-TL and 3506 with Nose Cones UA0777 fitted.