Installation & Assembly

Cleaning instructions

All Finishes:Clean the finish with mild soap and

warm water.Wipe entire surface completely dry

with clean softcloth.Many cleaners may contain

chemicals,such as ammonia,chlorine,toilet cleaner

etc, which could adversely affect the finish and are

not recommended for cleaning

Do not use abrasive cleaners or solvents on faucets and fittings.

Ensure that all coupling nuts are tight.Ensure that the

handle is in the off position.

Turn on the drain and main water supply, and check

for leaks. Repair as needed.

Installation checkout

1.Screw flexible hoses (8) under the body (1)

2.Insert O-ring washer (2) under base ange (1)

3.Insert threaded rod (3) under body (1)

4.Screw exible hoses (9) under the body (1)

5.Insert washer (4) and SS304 washer (5) through threaded rod (3)

6.Screw hexagonal lock nut (6) on to threaded rod (3) and tighten.

7.Screw the nut (6) with screws (7) to fix the faucet body (1)