Use and Care Guide

FROTH-PAK
™
POLYURETHANE FOAM SYSTEMS
For Technical Information: 1-866-583-BLUE (2583) . For Sales Information: 1-800-232-2436
THE DOW CHEMICAL COMPANY . Dow Building Solutions . 200 Larkin . Midland, MI 48674
www.dowbuildingsolutions.com
Printed in U.S.A.
Form No. 179-04540-0310P&M®™Trademark of The Dow Chemical Company (“Dow”) or an affiliated company of Dow
NOTICE: No freedom from any patent owned by Dow or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time, Customer is responsible for determining
whether products and the information in this document are appropriate for Customer’s use and for ensuring that Customer’s workplace and disposal practices are in compliance with applicable laws and other government enactments.
The product shown in this literature may not be available for sale and/or available in all geographies where Dow is represented. The claims made may not have been approved for use in all countries or regions. Dow assumes no obligation
or liability for the information in this document. References to “Dow” or the “Company” mean The Dow Chemical Company and its consolidated subsidiaries unless otherwise expressly noted. NO WARRANTIES ARE GIVEN; ALL
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.
COMBUSTIBLE: FROTH-PAK™ Polyurethane Spray Foam is combustible and may constitute a fire hazard. Do not expose foam to flame or temperatures above 240°F. For more information, consult MSDS, call Dow at 1-866-583-BLUE (2583) or
contact your local building inspector. In an emergency, call 1-989-636-4400.
FROTH-PAK™ Polyurethane Spray Foam contains isocyanate, hydrofluorocarbon blowing agent and polyol. Read the instructions and Material Safety Data Sheets carefully before use. Wear protective clothing, gloves, goggles or
safety glasses, and proper respiratory protection. Supplied air or an approved air-purifying respirator equipped with an organic vapor sorbent and a P100 particulate filter may be required to maintain exposure levels below ACGIH,
OSHA, WEEL or other applicable limits. Provide adequate ventilation. Contents under pressure.
Building and/or construction practices unrelated to building materials could greatly affect moisture and the potential for mold formation. No material supplier including Dow can give assurance that mold will not develop in any specific
system.
Put Dow’s anti-crossover nozzles to work with FROTH-PAK
™
systems.
For more information on FROTH-PAK
™
products, visit www.dowbuildingsolutions.com
or contact a Dow representative at 1-866-583-BLUE (2583).
Agriculture
• Light control and insulation in poultry
houses
• Silo and grain storage bin sealant
• Pest control
Air Sealing
• Roof/wall junctures
• New and retrofit construction
• Odor control
Asbestos Abatement
• Crack, void and hole sealant
• Sealant for irregular voids
• Sealant to maintain negative air pressure
Cold Storage
• Floor seams
• Fluted roof decks
• Wall-to-wall intersects
Heating, Ventilating,
Air Conditioning
• Pipe (including geothermal) insulator
• HVAC duct sealant
Insulation
• Stud wall cavity fill
• Ceiling/floor/wall penetrations sealant
Pool and Spa
• Insulation repair
• Structural support
• Sound damping
Plumbing
• Sealant around copper or PVC
pipes and penetrations
• Bathtub/shower base stabilizer
• Fiberglass bathtub repair
Other
• Archaeology fieldwork
• Elevators, sound damping
Below are just a few examples of the possible uses for FROTH-PAK
™
systems.
Clear/
Standard NS Clear Blue/
Back Cap Output Cylindrical Green/ Fan Spray Clear/
Color Spray Caulk (CG) Pour
Yellow Low n/a 259212 n/a n/a
White Medium 259219 259211 259216 n/a
Gray Medium/High 259218 n/a 259215 n/a
Black High 259217 n/a 259214 259220
Expansion Team
The FROTH-PAK
™
system teams
anti-crossover nozzles with the
INSTA-FLO
™
Dispensing Spray Gun.
It is sturdy, lightweight, reusable and
features a comfort-designed grip. The
INSTA-FLO
™
gun helps reduce over-
spray and waste by …
• Controlling flow rates
• Precisely metering output
• Protecting against accidental
discharge with a flip-up safety
mechanism
Advantages of
FROTH-PAK
™
Systems
• All-in-one insulation and air sealant
that helps prevent air infiltration,
moisture intrusion and much more
• Chemically cured, reducing curing
time
• Self-contained kits and refillable
canisters in a variety of convenient
sizes
• Low maintenance and parts
replacement costs
• Portable with no mixing, set-up
or warm-up necessary
Anti-Crossover Nozzle Stock Numbers