Operator`s manual

50
Remote Operation
6.7 DHCP Command Set
The following contains the DHCP (Dynamic Host Configuration Protocol)
commands of SCPI that the Ethernet control is compatible with.
6.7.1 SET:DHCP ON or SET:DHCP OFF
Syntax
SET:DHCP ON I OFF
Description
Turns DHCP mode ON or OFF
Possible error codes
5
Factory default value
OFF
Power on behavior
Keeps last value
*RST effect
None
Timing
In order for the new DHCP settings to take effect the matrix needs to be power
cycled.
6.7.2 GET:DHCP
Syntax
GET:DHCP
Description
Returns DHCP mode
Result
ON
or
OFF
Possible error codes
None