Operator`s manual

29
Manual (LOCAL) Operation
5.2.5 LCD Options
View and adjust the brightness and contrast of the LCD. Changes made
here are persistent over power down and up.
5.2.6 Set RS232 Baud Rate
View and select the Serial Port’s Baud rate from a set of preselected
values from 1200 to 115,200 b/s (see Section 3.3).
Use the arrows to change the baud rate settings.
Default value is 9600b/s.
5.2.7 Set GPIB Address
View and select the GPIB’s address. The default address is 9.
Not applicable for ENET (Ethernet) models.