Datasheet

Product name: DOWSIL™ 3145 RTV Mil-A-46146 Adhesive/Sealant
Clear
Revision Date: 04.09.2020
Version: 4.0
Page 9 of 23
Freezing point
No data available
Boiling point (760 mmHg)
Not applicable
Flash point
Not applicable
Evaporation Rate (Butyl Acetate
= 1)
Not applicable
Flammability (solid, gas)
Not classified as a flammability hazard
Lower explosion limit
No data available
Upper explosion limit
No data available
Vapor Pressure
Not applicable
Relative Vapor Density (air = 1)
No data available
Relative Density (water = 1)
1.12
Water solubility
No data available
Partition coefficient: n-
octanol/water
No data available
Auto-ignition temperature
No data available
Decomposition temperature
No data available
Dynamic Viscosity
Not applicable
Kinematic Viscosity
Not applicable
Explosive properties
Not explosive
Oxidizing properties
The substance or mixture is not classified as oxidizing.
9.2 Other information
Molecular weight
No data available
Particle size
No data available
NOTE: The physical data presented above are typical values and should not be construed as a
specification.
SECTION 10: STABILITY AND REACTIVITY
10.1 Reactivity: Not classified as a reactivity hazard.
10.2 Chemical stability: Stable under normal conditions.
10.3 Possibility of hazardous reactions: Can react with strong oxidizing agents. When heated to
temperatures above 180 °C (356 °F) in the presence of air, trace quantities of formaldehyde may be
released. Adequate ventilation is required.
10.4 Conditions to avoid: None known.
10.5 Incompatible materials: Oxidizing agents
10.6 Hazardous decomposition products:
Decomposition products can include and are not limited to: Formaldehyde. Methanol.