Vintage Series Insstructions

Note the location of those removable parts, so
that you have no difficulties in installing the
parts in the right place later on.
1. Open the door; see the following figure.
2. Remove the fire-resistant inner plates; see the
following figure.
The following tips may help in the removal of the
inner plates:
a. Lift baffle plate 3 on the front and pull it
forwards by 2 cm.
b. Now, lift the baffle plate on the left-hand side
and remove the left-hand inner plate 1 first.
c. Then remove baffle plate 3 followed by inner
plates 7, 8, 9, 2 etc.
Cast iron inner plates protect the
combustion chamber and dissipate heat to
the environment.
Removable internal sections
1 left-hand side inner plate
2 right-hand side inner plate
3 baffle plate
4
centre bottom of the fire
compartment
5 bottom fire basket not for Vintage 30
6 top fire basket
7 left-hand rear inner plate not for Vintage 30
8 centre rear inner plate not for Vintage 30
9 right-hand rear inner plate not for Vintage 30
10
left-hand bottom of the fire
compartment
not for Vintage 30
11
rear bottom of the fire
compartment
not for Vintage 30
12
right-hand bottom of the
fire compartment
not for Vintage 30
13 ash removal port not for Vintage 30
3. Remove the ashtray.
Please note:the Vintage 30 does not have an
ashtray.
4. Install the adjustable feet under the legs, see
figure. When used on a slippery floor surface, it is
Subject to change because of technical improvements
7