Sense Control Installation & User Instructions

is used again.
In order to replace the side glass, all the inner panels
and the air guide must first be removed. The air guide
is attached with a M8 nut in the middle at the top of the
appliance. Proceed as follows:
1. Unscrew the two glass fixings with parts (1) and
(2) and remove the glass (3), see following figure.
2. Check the glass seal and, if necessary, fit a new
sealing rope.
3. Place the new glass in the grove and tighten the
glass fixings.
09-20021-025
1
2
3
Sense spare parts
Sense 100/103/113/200/203
Pos. Part number Description Quantity
01 03.66544.002 base plate 1
02 03.77429.002 fire basket right rear 1
03 03.77428.000 fire basket left rear 1
04 03.77425.002 fire basket right 1
05 03.77424.002 fire basket left 1
06 03.77423.002 fire basket 1
07 03.77523.000 side inner plate right
rear
1
08 03.77522.000 side inner plate left
rear
1
09 03.76181.000 baffle plate inner
plate
1
10 03.77525.000 side inner plate right 1
11 03.77524.002 side inner plate left 1
12 03.05216.000 ash pan 1
Sense 300/303/400/403
Pos. Part number Description Quantity
01 03.66549.002 stove base 1
02 03.77444.002 fire basket right rear 1
03 03.77443.000 fire basket left rear 1
04 03.77442.002 fire basket right 1
05 03.77441.002 fire basket left 1
22
Subject to change because of technical improvements