250 with Smoke Control Installation & User Instructions

19
Installation Instructions
1. Installing the Appliance
Each installation is unique to the property so it is not possible
to give details to suit every setting. The installation must comply
with Building Regulations
†
and be made using "best practice"
construction methods
‡
.
Many fireplace openings have a supporting lintel. Do not remove
without supporting the remaining structure of the building. Do not
support the structure with the appliance or the flue system.
1.1 Take care when installing the appliance. Careless
handling and use of tools can damage the finish and/or
area.
Assemble the appliance by attaching the legs to the base of
the appliance, see Diagram 1.
Screws to
secure legs
Bolts to adjust
levels
1
Choose top or rear flue exit.
Hexagonal
bolts
Top
Rear
2
— Fit flue collar and blanking plate to suit.
— Attach flue collar to top or rear with hexagonal bolts,
see Diagram 2.
— Seal with fire cement.
— Secure blanking plate with clamping bar, see Diagram 3.
3
1.2 Top flue pipe installation
— Lift appliance into position.
Take care not to damage the hearth finish.
— Level using adjustable bolts, see Diagram 1.
— Connect appliance to the chimney using flue pipe.
— Secure with self tapping screw.
— Seal the connecting joints with fire cement.
4
† England and Wales – Document J / Scotland -
Part F/Document J (Republic of Ireland only)
‡ the latest edition of BS 8303, BS EN 15287,
BS 7566