250 with Smoke Control Installation & User Instructions

18
1. General
1.1 To make the installation of the appliance easier it is best
to remove the internal components before fitting into the
builders opening/studwork.
PACKING LIST
 • User&InstallerInstructions
 • Warrantycard
 • Pairleathergloves
 • Doorhandletool
 • Fluecollar
 • 4Xlegs
 • FireCement
 • Scraper
STANDARD FEATURES
 • Primaryair(undergrateairforfullmulti-fueluse)
 • Airwash(forwoodburning/cleanglass)
 • Presetsecondaryaircontrol(toensurecompleteburning
of flue gases)
 • Riddlinggratesystemforcleande-ashing
 • Toporrearflueexitoption
1.2 For the best results remove the following components as set
out below.
2. Removal of the Log Guard
2.1 To remove the Log guard:
— Raise the right hand side of the Log Guard to its natural
stop, see Diagram 1.
Log
Guard
1
— Slide the Log Guard to the right.
— Rotate the left hand side forward and remove from
the firebox.
Do not use appliance without the log guard in position.
Pre-Installation Instructions
3. Removal of the Fire Bricks
3.1 Remove the firebricks as part of the routine maintenance.
This can be carried out without the use of tools.
3.2 Allow the appliance to cool fully before removing firebricks.
3.3 Take care when handling, as bricks can become fragile after
use. Life span depends on the type of fuels burnt and the
level of use.
3.4 Replace damaged bricks as soon as possible.
To remove the bricks:
3.5 Remove the side firebricks.
3.6 Slide the rear firebricks forward to remove.
3.7 Replace in reverse order.
4. Removal of the Baffles
4.1 The appliance is fitted with a baffle in the top of the firebox
to maintain efficient combustion.
4.2 Allow the appliance to cool fully before removing the baffle
system.
4.3 To remove the baffle:
— Remove the log guard from the appliance for access.
— Lift the baffle plate.
— Rotate the baffle and slide it out through the front of the
appliance.
— Replace in reverse order.
4.4 Remove and clean the baffle system to ensure the flue ways
are clear of soot and debris and to ensure the safe, efficient
operation of the appliance. The frequency of cleaning will
depend on the appliance operating conditions.
4.5 The baffle system is designed to give safe and efficient
operation of the appliance. Replace any damaged baffles
immediately.
4.6 Do not modify the baffle system.