Technical data

Preparation

Please inspect the replace for damage caused during transport immediately after delivery and

notify your distributor in case there are any defects. Do not put the appliance into operation

in the meantime.

In order to avoid damaging the replace during installation and to make its handling easier,

it is recommended to remove previously all loose parts (re-resistant bricks, grille, ashtray,

...) from the stove. Note the location of those parts while removing them, so that you have no

difculties in re-assembling the parts later on.

Opening and closing the door

The door can be opened and closed by means of the handle in the mid-

dle.

The smoke outlet

Your stove is suitable for two connections: a top or a rear connection.

Upon supply, the top

and rear exhausts have

been left open. Depen

ding on the position

chosen, one opening

can be covered with

the blanking plate sup

plied; the other one can

be equipped with the

connection collar supp

lied (see picture). Use

the xings supplied and

be sure to tightly seal

the connection collar

and the blanking plate

to the stove by means

of the kit or paste sup

plied.