Technical data
Foreword
The Installation Manual and Operators Instructions must accompany this appliance. As well
as instructions for installation and information about use, you will also nd advice concerning
safety and maintenance.
Please read this booklet carefully before installation and before ring the unit.
Save this booklet and pass to any subsequent user who can also prot by it.
Introduction
Your DOVRE purchase has made you the owner of a high quality product that symbolizes
a new generation of energy-saving and ecologically safe heaters, producing convection heat
as well as radiant heat with optimum efciency. Through the application of a revolutionary
combustion concept DOVRE heaters achieve astonishing results in full compliance with strict
environmental and safety norms. Also, you will be enjoying the lovely sight of the re blazing
in the stove. Our heaters are produced in accordance with ISO 9002, using state-of-the-art
production means. In the unlikely event of a malfunction, you can always rely on DOVRE’s
after-sales service. This heater is designed to be installed in a living room and to be hermeti
-
cally connected to a ue (chimney).
If the stove is professionally installed, connected to a well-functioning chimney and suf-
ciently ventilated, you can take the long-term and trouble-free functioning of your heater for
granted.
Please consult an expert when installing and connecting the heater. The manufacturer cannot
be held liable for problems caused by faulty installation.
Safety
The heating unit is best installed, commissioned, and checked by a competent installer who is
aware of national and local legislation.
The heater is designed to heat a room, which means that all surfaces, including the front glass,
can get very hot (> 100 °C).
Please do not place any curtains, clothes, laundry, furniture or other combustible materials on
or near the heater.
It is advised to make a re in the stove with the highest possible intensity right after it is in-
stalled, so as to cure the heat-resistant paint nish. This may involve some odour production,
which will however disappear after a while.
It is necessary to maintain and regularly clean the stove and the chimney for the stove to
function safely and for a long period of time. Please follow the cleaning instructions in the
chapter concerned.
In case of a chimney re, immediately close all air intake vents of the appliance and alert the
reman.
Broken glass should be replaced before using the heater again.
The stove is specically designed for burning certain kinds of fuels. In the technical speci-
cations under cover you can nd detailed information concerning this topic. It is absolutely
prohibited to burn fuels other than these, as this may damage your heater. Moreover, it is
ecologically harmful.
29