Owner Manual

· Please check that all listed parts and hardware are included before beginning assembly.

· Save all packing materials until assembly is completed to avoid accidentally discarding small parts.

· Read through the preparation and assembly instructions in full before beginning assembly.

ot egamad ro/dna yrujni lanosrep diova ot tcudorp eht g

itfil nehw ERAC DNA NOITUAC esu esaelP·

the product.

· For ease of assembly, two adults are recommended. Assembly time is approximately 30 minutes

FURNITURE CARE: PRE-ASSEM BLY PREPARATION:

All you need to clean your newly acquired furniture

is warm water and soap. For extra cleaning power,

mix 25% white bleach with 75% water. Using a stiff

bristle brush can help remove any particles from

between the simulated wood grain.

OUTDOOR STYLE REINVENTED

"We're reinventing all-weather outdoor style

and we're just getting started...”

Each item is made with high-density material which prot ects

against cracks, rot and splinters keeping your furniture

timelessly beautifu, no matter the season.

UV-stabilized materid resists color fading.This means no

repaintirg ever!

PAGE 1
"We're reinventing all-weather outdoor style and we're just getting started...” FURNITURE CARE: All you need to clean your newly acquired furniture is warm water and soap. For extra cleaning power, mix 25% white bleach with 75% water. Using a stiff bristle brush can help remove any particles from between the simulated wood grain.
PAGE 2
IITEM NAME: Adirondack Chair STEP-BY-STEP ASSEMBLY: STEP 1: Attach Front Legs (C) to Seat (A) by inserting 3x 2.55” Bolts (H) on each side into the corresponding holes. Secure each bolt with a washer (G) and nut (F) as pictured. STEP 2: Attach the front part of the Arms (D) to the Front Legs (C) using 2.55” Bolts (H) and secure each with washer (G) and nut (F) as pictured on each side. 1 2 D1 1 2 D2 STEP 3: Attach the Back (B) to the Seat (A) using 2.4” Screws (J). Attach Back (B) to Arms (D) using 3.