Installation Manual

3
Dotworkz D-Series Seals & drip edges are engineered for horizontal installation Only: Dome bubble faces down.
Vertical and dome-up installations are not advised, and will be prone to moisture incursion within housing, and
will void warranty.
Dotworkz D-Series Mounting Guidelines
COOLDOME™ Wiring
Dotworkz CD Series Operate using DC low voltage only, and
creates ample currents when cooler is engaged.
18 gg wire is Not recommended for cooler wiring.
Follow relevant Cable Gauge Guidelines provide in this
document applicable to your product model.
CD’s are Dedicated 12 VDC or 24 VDC models Only.
Use Step Down Power supply Included in CD Package to power
from high voltage line supply.
Dotworkz Humidity Removal Canister
Dotworkz Provides a Humidity Removal Canister must be installed into COOLDOME prior to entering
enclosure into service.
Active Cooler within COOLDOME lowers temperature to at or near dew point within
COOLDOME, so trapped air must be dried out to eliminate condensation issues. The sealed air is
efficiently dried out by this desiccant canister, which provides a color coded saturation state window.
It must be removed from its foil envelope, and can be installed on shelf next to cooler, or
above camera on camera mounting plate. See installation section for service info on this product.
COOLDOME™ Accessories & Mount Options
(some brackets only compatible with D-Series, consult Dotworkz Sales Representative for Details)
Your COOLDOME is wall mount ready, but can be Installed with a number of Dotworkz Optional Mounts (sold separately)
NO
18 gg
BR-ECB1
BR-PSA1
BR-CNR1
NM-CDPS NEMA for
CD Power Supply
KT-CDR2 Outdoor CD Power Pole Mount Kit
BR-MPM1
BR-MPM1-AC
BR-APM1
BR-MPM1
With common
Pipe anchor for
pendant mounting