Installation Manual

19
3.4. BASH All-PoE
IP Camera Compatible – PoE Powered Housing:
This model is designed to work seamlessly with small PoE powered IP cameras on the market
today. The input to this BASH system is PoE, which is carried on a single Cat 5e cable. Note that
a PoE injector is required to power this BASH system.
3.4.1. Loosen the outer sealing nut of the cable gland to relieve pressure on the internal
rubber gland. Do not completely remove the sealing nut as it would require dislodging
the external microphone.
3.4.2. Pass an unterminated Cat 5e cable through the sealing nut and into the open hole in the
internal rubber gland, bringing the cable into the enclosure. Terminate an RJ45
Connector on the unterminated Cat 5e cable and connect it to the PoE input on the PCB
(left side).