Installation Manual
16
3.3. BASH All-Pro
IP Camera Compatible - 12VDC Powered Housing:
This model is designed to work seamlessly with small PoE powered IP cameras on the market
today. Inputs to this BASH system are 12VDC power and Ethernet via a Cat 5e cable.
3.3.1. Loosen the outer sealing nut of the cable gland to relive pressure on the internal rubber
gland. Do not completely unscrew the sealing nut as it would require dislodging the
external microphone.
3.3.2. Pass an unterminated Cat 5e cable through the sealing nut and into one of the open holes
in the internal rubber gland, bringing the cable into the enclosure. Terminate an RJ45
Connector on the unterminated Cat 5e cable and connect it to the Ethernet input on the
PCB (left side).