User's Manual

Troubleshooting Tips
 Serious stroboscopic picture showing in live view.
It is mainly caused by different AC frequency, which can be solved by
changing the AC frequency in App settings-Picture/View.
 Device is offline in device list?
Check whether the device network is good or not.If there is TF card inserted,
please unplug the TF card, reset the device and router. Check whether the
device is online or not.If the problem still exists, please reset the device (Insert
the thimble into the "reset" hole and long press about 5s . Please re-add the
device.After that,check the device firmware and App version and upgrade them
to the latest version.
 How to do if the device is offline after changing a router
or WiFi password?
Please reset the Cam (by pressing RESET key on the device for about 5
seconds, and a beep will be heard), and re-add the device in App.
 Cannot check video playbacks.
Try to replug the TF card again and make sure the recording mode is ON
normally. If there is still no video recordings, please go to "Settings", enter
"Record settings", disable "Record switch",and format the TF card; If problem
still exists, please then try a new TF card.