Information Sheet

Features & Benefits
• Reverse serrations prevent over-torquing
• Removable
• High prole helical thread design provides deep engagement in
the substrate
• No plug or plastic anchor required
• Small pilot hole in masonry-based materials
• No pre-drilling required in drywall or wood
• Heat treated point provides increased tip hardness
Installation Instructions
Head & Drive Types
“Building a Better Brand” | L.H. Dottie Co. | Commerce, CA | 323-725-1000 | www.lhdottie.com
PRODUCT SPECIFICATIONS
Wall Twister®
The Wall Twister® is an all steel, single piece screw anchor manufactured
with a unique deep cutting thread design, it’s suitable for fastening
objects into drywall, wood, concrete, plaster, brick, and block walls.
The patented reverse serration design under the head prevent over-
torquing. When working with masonry-based materials, use the
3/16” carbide tipped drill bit included in the kit to create a pilot hole.
When fastening into drywall or wood, no pre-drilling is required.
Typical applications include HVAC xtures, signs, telecommunications
equipment, plumbing xtures, and many more.
Product Image
Product Image
No Pre-Drilling Required
Pre-Drilling Required
1. Pre-drill a 3/16” hole using the carbide
tipped drill bit provided.
2. Insert the anchor through the xture and
screw into base material until secure.
Simply insert the anchor through the xture
and screw into base material until secure.
(Wood and Drywall)
(Concrete, Grout-Filled Masonry, Brick Masonry,
Hollow Concrete Masonry, Plaster)
Pan Head
Phillips
Hex Head
Phillips/Square
Wafer Head
Phillips
Pan Head
Square
Suitable Base Materials
Wood
Drywall
Concrete
Grout-Filled Masonry
Brick Masonry
Hollow Concrete Masonry
Plaster