Cut Sheet

E6
TOOLS & SPECIALTY ITEMS > SPADE DRILLS > BELL HANGER DRILLS
To Order: Phone [phone] / Fax [phone]
Bell hanger drills are used to drill and fish small
gauge wires. After drilling through the stud or
header, a wire is attached to the fish hole in the
flute and the drill is retracted, pulling the wire
through. Bell hangers are available in a variety
of diameters and lengths and are suitable for
telephone installations, security and cable
applications.
• Fish Hole In Flute For
Pulling Wire
• Tapered For Quick Chip
Clearance
• One Per Display Pouch
• Aggressive Point For
Fast Drilling In
Wood & Metal
• Caution! Always Wear
Eye Protection
• Cold Forged
• Machine Finish Cutting
G
roove
• Rust Protection
• Wing Tip Design
• Precision Ground Hex Shank
•
Caution! Always Wear Eye
Protection
Spade drills are used for boring
hardwoods, softwood, plywood and
drywall. Fully heat treated to extend bit
life and individually stamped with size.
P
acked in a Hanging Pouch
S
PD14 21700 1/4" 6" 160.060# Ea
S
PD516 21702 5/16" 6" 160.100# Ea
S
PD38 21704 3/8" 6" 160.100# Ea
S
PD716 21706 7/16" 6" 160.100# Ea
S
PD12 21708 1/2" 6" 160.100# Ea
S
PD916 21710 9/16" 6" 160.100# Ea
S
PD58 21712 5/8" 6” 160.100# Ea
S
PD1116 21714 11/16" 6" 160.110# Ea
S
PD34 21716 3/4" 6" 160.110# Ea
SPD1316 21718 13/16" 6" 160.100# Ea
SPD78 21720 7/8" 6" 160.110# Ea
SPD1516 21722 15/16" 6" 160.120# Ea
SPD1 21724 1" 6" 160.110# Ea
SPD118 21726 1-1/8" 6" 160.130# Ea
SPD114 21728 1-1/4" 6" 160.130# Ea
SPD138 21730 1-3/8" 6" 160.140# Ea
SPD112 21732 1-1/2" 6" 160.150# Ea
CAT NO UPC SIZE LENGTH STD MSTR WT/STD UNIT
S
pade Drill Bits
PC 6270
Packed in a Hanging Pouch
BLH3612 21750 3/16" 12" 160.110# Ea
BLH1412 21752 1/4" 12" 160.170# Ea
BLH5612 21754 5/16" 12" 160.250# Ea
BLH3812 21756 3/8" 12" 160.340# Ea
BLH1212 21758 1/2" 12" 160.540# Ea
BLH1418 21760 1/4" 18" 160.260# Ea
BLH5618 21762 5/16" 18" 160.390# Ea
BLH3818 21764 3/8" 18" 160.550# Ea
BLH1218 21766 1/2" 18" 160.870# Ea
BLH1424 21770 1/4" 24" 160.350# Ea
BLH5624 21772 5/16" 24" 160.530# Ea
BLH3824 21774 3/8" 24" 160.750# Ea
BLH1224 21776 1/2" 24" 161.220# Ea
BLH1430 21778 1/4" 30" 160.380# Ea
BLH3830 21780 3/8" 30" 160.880# Ea
BLH1442 21782 1/4" 42" 160.610# Ea
BLH3842 21784 3/8" 42" 161.310# Ea
CAT NO UPC SIZE LENGTH STD MSTR WT/STD UNIT
Bell Hanger Drills
PC 6280
Electrician's Flex-A-Bits are specifically designed to
facilitate fishing wires and cables through walls and
ceilings. A self feeding screw point is permanently
brazed to flexible shafts.
T E C H T A L K