Owner Manual

STEP 9

1 - Fit the lower part P19 in diagonal position to insert it inside the cupboard

2 - Lean part P19 in part P2, P3 and place it over the F7 detailed in the figure here

below

3 - Lower the other side of part P19, leaning it over the left F7

1 - To assembly the doors, fit door P23 lower hinge bolt inside the bushing fixed in part P7

Then, pull down the pin of door P23 upper hinge; align the door and release the pin to fit

the bushing fixed in part P5

2 - Repeat the step for part P22

STEP 10

3 -Insert product logo

F17

P19

P23

P22