Owner Manual

STEP 7
STEP 8
1 - Put the cabinet a flat surface.
2 - Completely tighten all screws.
1- Turn the cupboard so that it will stand in the position of use.
2- Fix F7 to parts P2 and P3, as shown here below.
2x
F10
2x
F11
4x
F7
16x
F2
16x
F1
P5
P3
P2
P7
1
2
P7
P5
P2
P3
WARNING
FLAT SURFACE
After tightening the screws, make sure the cabinet does
not appear to be misaligned.
3 - To assembly the cabinet with caster, align
the F10 and F11 to the holes in part P7
and fix them with F1 and F2.
4 - WARNING: Casters with lock (F11) must be
fitted in the frontal side of the cabinet