Owner Manual

STEP 6
1. Attach 2 hinges (E) to left door (8) by inserting 4 screws (G) through holes on hinges (E),
then tighten to left door (8).
2. Attach 1 handle (F) to bottom of left door (8) by inserting 2 screws (M) through holes on
handle (F), then tighten to bottom of left door (8).
3. Stick 1 silicon pad (L) on handle (F) to prevent scratches on shelf edge when door is closed.
4. Repeat above steps to assemble hinges (E) and handle (F) and silicon pad (L) to right
door (9).
STEP 7
1. Attach left door (8) to cabinet by inserting 8 screws (G) through holes on hinges (E),
then tighten to left side panel (3).
2. Attach right door (9) to cabinet by inserting 8 screws (G) through holes on hinges (E),
then tighten to right side panel (4).
*Note: Tightening screw in position “a” will adjust doors up or down; tightening screw in position “b” will
adjust doors to or from cabinet and tightening screw in position “c” will adjust doors side to side.
Door Adjustments