Owner Manual

STEP 4
1. Insert 2 wood dowels (C) into wood dowel holes on top board (1).
2. Attach top board (1) to left side panel (3), right side panel (4) and rear cross bar (5) by
inserting wood dowels into wood dowel holes on rear cross bar (5) and inserting cam bolts into
cam lock holes on left side panel (3) and right side panel (4).
3. Insert 4 cam locks (B) into cam lock holes on left side panel (3) and right side panel (4), then
rotate clockwise to secure cam bolts in place.
4. Attach bottom board (2) to left side panel (3) and right side panel (4) by inserting cam bolts
into cam lock holes on left side panel (3) and right side panel (4).
5. Insert 4 cam locks (B) into cam lock holes on left side panel (3) and right side panel (4), then
rotate clockwise to secure cam bolts in place.
STEP 5
1. Attach upper back board (10) and lower back board (11) together by sliding into plastic
connection strip (H).
2. Attach upper back board (10) and lower back board (11) to cabinet by inserting 14 wood
screws (I) through holes on upper back board (10) and lower back board (11) then tighten
into cabinet.