Owner Manual
STEP 1
1. Screw 4 cam bolts (A) into cam bolt holes on top board (1).
2. Screw 4 cam bolts (A) into cam bolt holes on bottom board (2).
STEP 2
1. Screw 2 cam bolts (A) into cam bolt holes on left side panel (3).
2. Screw 2 cam bolts (A) into cam bolt holes on right side panel (4).
STEP 3
1. Insert 2 wood dowels (C) into wood dowel holes on left side panel (3).
2. Attach left side panel (3) to shelf (6) and rear cross bar (5) by inserting cam bolts (A) into cam
lock holes on shelf (6) and wood dowels into wood dowel holes on rear cross bar (5).
3. Insert 2 cam locks (B) into cam lock holes on shelf (6), then rotate clockwise to secure cam
bolts in place.
4. Insert 2 wood dowels (C) into wood dowel holes on right side panel (4).
5. Attach right side panel (4) to shelf (6) and rear cross bar (5) by inserting cam bolts into cam lock
holes on shelf (6) and inserting wood dowels into wood dowel holes on rear cross bar (5).
6. Insert 2 cam locks (B) into cam lock holes on shelf (6), then rotate clockwise to secure cam
bolts in place.










