Specifications

Preheating state
Preheating output
Charger specification \
Charging current \
Charging power off
Charging saturation voltage
Charge saturation state
Charging use
Zero volt charging
5 Short circuit protection
Short circuit / open circuit low
resistance
Over temperature protection
6
Charging state and charging
protection
/
3
4
Preheating function
Charging mode
4.15±0.05V
show Green when fully charged
accepted
accepted
Short circuit / open circuit low resistance:6 RGB lights flash 3 times
Note: the motor specification is 0820, and the length specification of wire rod shall be in accordance with the
requirements of drawing data (as shown in the drawing).
Type-C (DC5V) or 510 threaded head (4.2V) charging
500mA ±50mA
when charging, 6 RGB lights flash red according to the electric capacity (the
saturated part of the is fixed , and when charging part of the lamp, flash
shines). When the battery voltage is charged to 4.2V±0.05V, it turns green
after being full.
charging protection:The charging current will be turned off when charging
reaches 4.18V
4.18V