User manual

66 LogGraph
DE Dostmann Electronic GmbH
mouse button (with 3D view, the mouse pointer must be within the axis scales on the
front plane, otherwise there will be no reaction). The automatic axis scaling is
disabled.
Resetting the graph section
If, while holding down the left mouse button, you drag the mouse pointer from bottom
right to top left - so unlike the procedure described above - the graph is reset to its
original size when you release the mouse button. The automatic axis scaling is
activated.
5.4.2.2 Selection using the right mouse button
While the right mouse button is pressed, the graph section shown can be moved to
the left, right, up or down or reduced or enlarged in all four directions from the sides
and angles. In this connection, the starting position on which you click with the right
mouse button determines the next operation.
Depending on the starting position, the cursor changes its appearance and
indicates the direction in which you can move. Five directions can be distinguished:
- [1]. Left <> Right
- [2]. Top <> Bottom
- [3]. Bottom left <> Top right
- [4]. Top left <> Bottom right
- [5]. Move
[1] / [2] Reducing or enlarging the image section from the sides
If, while the right mouse button is pressed, the mouse is in a range from about 0-20%
or 80% - 100% in the horizontal or vertical direction (almost in the middle of one of
the graph edges), then the graph can be enlarged or reduced in the horizontal or
vertical direction while holding down the mouse button. The automatic scaling of the
concerned axes is deactivated.