User manual

54 LogGraph
DE Dostmann Electronic GmbH
"Close" allows you to quit the readout program.
4.4 Setting the logger time
The synchronization of the logger internal clock is performed via the menu item
"Logger->Set the time" or the shortcut key "Time" in the toolbar. While recording, it
is not possible to modify the logger time.
The window displays the current logger time and, for purposes of comparison, the
current PC time.
Depending on selection,
o the PC time can directly be accepted or
o set to any other value.
Immediately after synchronization, there may be small deviations in the display of the
PC clock and Logger clock (+/-1 second) due to delay in data transmission.
"Transfer the date/time" allows you to set the logger time to the specified value.
4.5 Displaying the logger status
The status display of the current logger parameters is done via the menu item
"Logger->Display the status" or the shortcut key "Stat" in the toolbar. First, the
operational readiness of the logger is checked and all the logger parameters
required for displaying the status are retrieved.
It takes a few seconds before all the data are uploaded and the status window
appears.