User manual

49Starting the software
DE Dostmann Electronic GmbH
Display/Use:
The general settings for the logger operation are summarized in the category
Display/Use.
Logger time:
The date and time of the internal logger clock are displayed. After clicking on the
"Set" button, you can synchronize the logger time in the "Set the logger date and
time" window. While recording, it is not possible to modify the logger time.
Power saving functions and update intervals for LCD, LEDs and beeper:
Disabling the LCD display (it goes into sleep mode after pressing a button),
deactivating the LED displays or the beeper reduce the power consumption of the
logger and prolong the battery life.
LCD display:
During recording, the update of the logger display is performed at the pace of the
measuring interval set. In standby mode, an update interval can be entered in the
upper part of the display.
When the "Use the sleep mode" box is activated, the LCD display goes into sleep
mode after pressing the logger buttons and after expiration of the specified delay
time. The logger no longer displays the measured values, but only a status ("run"
during the recording process and "LC" in standby mode). When the "Off in sleep
mode" box is activated, the status will no longer be displayed and the display will