User manual

42 LogGraph
DE Dostmann Electronic GmbH
connected via an appropriate cable and powered on and it must be the only device
currently connected (the other devices that are already connected must be turned
off).
All ports available for connection are searched. Ports that are already used by a
device or are being used by another program are not searched.
Each verification (port, transfer rate) requires about 2 seconds. When a device that
responds to the message is found, the search is interrupted and the settings found
are saved in the device settings because of the information contained therein.
4.1 Starting the software
Start the software by double-clicking on the Log-Graph icon on the desktop or via
the selection in the program manager with the sequence "Start-> Programs-> Log-
Graph".
When the connection to the logger is successfully established, the following startup
window appears shortly thereafter: