User manual

41Working with the Log-Graph software
DE Dostmann Electronic GmbH
3.6 Basic settings for the software operation
The basic settings for the software operation are:
the selected national language and
the port used for operation
The settings made are saved in the file .ini.
3.6.1 National language
When you launch the software for the first time (after the installation), the PC
specifications for the national language are first accepted from the installation.
The national language may be selected independently of the system country settings.
The changes only have an effect on the operation of the Log-Graph software and not
on the system settings (or other programs).
"Apply" saves the changes made in the file .ini. The changes are immediately
effective and will be used by default during all subsequent program startups.
"Cancel" undoes the changes made.
3.6.2 Configuring the port
For purposes of automatic detection, the new device to be installed must be