User manual

23Introduction
DE Dostmann Electronic GmbH
The device can now be used with the Log-Graph software.
The name of a serial port (from COM1 to COM 256) has been automatically
assigned to the USB port during the driver installation. Log-Graph automatically
detects the assigned port. You can also find it under System settings where the port
name can subsequently be changed.
2.7.3.2 Renaming the port
Usually, the automatically assigned port name does not need not be changed.
However, if this is necessary, then you will find that name in "Device Manager" under
"Ports (COM & LPT)".
To get there, proceed as follows: