Product Manual

Transporting and Receiving
7
1. Receiving Your Unit
For all Units
You should inspect the grinder immediately after you receive delivery.
See the "Machine Component Identification" section of this
manual for a diagram of the grinder and its components.
 If you have missing components, contact your rental company or Dosko
Customer Service at 1-800-822-0295.
New Unit: Truck
Delivery
Depending on your unit and model, it may have been shipped on a wooden skid,
cardboard container or other appropriate method.
 For any shipping damage, make sure the delivery driver acknowledges it and a
claim is filed with the freight delivery company.
Note: Shipping damage claims are not covered by Dosko
warranty. Please contact carrier!
 If any assembly is required. Separate assembly instructions will be included.
New Unit: From a
Dealer
Your unit should have been delivered completely assembled and ready to run.
Read the "Operation: Preparing for Operation" section (page 9), and verify that the
unit has been properly "prepped" before initial use.
Factory Delivery
In these cases, your unit has been completely assembled, tested and pre-run.
It should be ready for usage. See "Pre-Start Checklist and Procedures".