Product Manual

Operation (cont’d)
17
7. Storing the Grinder
When you are finished using the grinder and it has cooled, you must:
o Cool engine before storage.
o Clean the grinder.
o Inspect for worn or damaged parts.
o Choose covered storage location.
o Prevent accidental starting.
o Plan on exercising the engine at least monthly unless the grinder is prepared for long-term
storage.
Detailed instructions are provided below.
Cool engine
Let engine cool for at least five minutes before storing. A hot engine can
be a fire hazard.
Clean grinder
Clean all grease, dirt, mud and other foreign matter from the machine.
Touch up paint damage to prevent rust.
Inspect grinder
Inspect the machine for worn or damaged parts and tighten any nuts or
screws that may have become loose. Pay particular attention to the
cutting teeth.
Choose a storage
location
Store the grinder in a location that is:
o Clean and dry
o Away from sources of heat, open flames, sparks, or pilot lights, even
if the grinder's gas tank is empty. Residual gasoline could ignite.
o Away from extreme high or low temperatures.
o Covered for extra protection
Remove key
Remove key from starter and secure key in a safe location, or remove
spark plug, in order to ensure the grinder cannot be started in a storage
location or by untrained persons or children.