Owner's Manual

Maintenance & Repair (cont’d)
25
Maintenance Schedule
CAUTION:
Before attempting any maintenance, be sure that the engine is shut off,
the key, the positive battery cable, and both spark plug wires are
removed, and the engine is cool to the touch!
Item
(What to check or action req’d)
Daily
Each
Use
10 hours
20 hours
40 hours
2x/year
Bearings, Shaft - Grease
X
Bearings, Wheel - Grease
X
Belt Tension - Tension
X
Bolts - Tightness
X
Engine – See manual
Gasoline – Amount
X
Safety Switches – Operation
X
Warning Decals – Legible
X
Tires, Flaps – Condition
X
Wires, Cables – Condition
X
Cutter Teeth - Sharpness
X
Safety switch and relay (equipped models only) should be replaced after 7 years of use.
IMPORTANT:
If a part needs replacement, only use parts that meet the manufacturer’s specifications.
Replacement parts that do not meet specifications may result in a safety hazard or poor operation of
the grinder.
Contact Dosko Customer Service at 1-800-822-0295 or 1-763-428-2237
for any questions, problems, or parts orders.