Owner's Manual

Operation (cont’d)

Chip Build-up

9. When grinding larger stumps, chips may begin to build up under the wheels.

• Release brake and pull machine towards you so that the “chip pile” is directly under

the cutting wheel.

• Drop cutter wheel down on “chip pile”, material will be discharged from machine

area.

WARNING: Flying Debris Hazard

Stones, chips, and debris can cause serious injury or property damage.

Debris can fly 75 ft (23 m) in any direction out of the chute and bounce off

objects and hit operator, bystanders or breakable objects.

• On these larger stumps, DO NOT allow grinder wheels to drop into stump hole. If a hole

is in the way of your progress, fill it with chips or change position.

WARNING:

Stop engine and set brake before leaving operator’s position. KEEP

BRAKE ENGAGED except when changing locations. Never attempt to ride

or stand on stump grinder.

10. When finished, stop the machine.

11. Pull machine away from stump, and rake chips away from stump.

NOT CORRECT

CORRECT

Wheel

Chip pile/debris

Hole

Direction of

grinding

Chip pile

Cutter wheel