Owner's Manual

Operation (cont’d)

5) Pull choke if engine is cold. If engine is hot, do not use choke.

6) Grip operator presence bar & grinder handle bar together in left hand.

WARNING:

A rotating cutting blade is very dangerous. Stay at the controls and keep

others away until you are sure the blade has come to a complete stop.

WARNING:

Cutting wheel immediately begins rotating when starter is pulled. There

is no clutch or gear to separately start or stop cutter wheel.

7) Since the cutter wheel starts rotating when starter is activated, press down on handle bar to

lift cutter wheel off the ground.

8) A) Pull Start: Rapidly pull “Start” cord (recoil starter) with right hand several times until

engine starts. Allow starter cord to return slowly.

B) Electric Start: Turn Key switch to the START position and hold until the engine starts.

9) If engine does not start, repeat steps 5-8.

Handle bar

adjustment

Cutting

blade

Brake

lever

Operator

presence bar

Handle bar