Owner's Manual

Operation (cont’d)
13
2. Starting the Grinder
After you have completed the pre-start checklist and procedures, you are ready to start the
grinder.
The following directions detail how to start the engine of your grinder.
WARNING:
Never attempt to use the grinder without proper protective equipment,
particularly eye protection and a full-face shield.
WARNING:
If you have an implanted medical device, consult a physician before using
this device.
To start the grinder:
Note: For additional engine starting instructions see your Honda/Kohler engine manual.
1) Before starting you should raise or lower the handle bar to a comfortable position to
accommodate the height of the stump you will be grinding.
2) Place stump machine into position with cutting blade near the front-top edge of the stump.
3) Using lever on handle to lock the one wheel brake.
Note: For tighter brake adjustment, turn knob on top of brake lever.
WARNING:
Stay in the OPERATOR POSITION while actuating controls. Never leave grinder unattended.
4) Pull Engine Switch ON. (Some models may have an additional on/off switch located on the
engine)
Operator
Position
Danger Zone
Safe Zone