Manual

doerr-outdoor.de7
07 | OPERATION
07.1 Overview home screen
Switch the slide control (11) to the middle position SETUP .
11
After the DÖRR Logo the LCD display (08) shows the basic factory
settings:
Camera is in single photo mode
Resolution 5 Megapixel
Battery level
Date/time
Used/Free space
(Example with 16GB SDHC card)
07.2 All basic factory settings
CAM
Camera mode: Photo
Photo settings: Resolution: 5 M
Multi Shot: 1 photo
Flash Power: High
PIR
Trigger mode: PIR Sensor ON
PIR Sensitivity: Level 7
PIR Delay: O
Time Lapse: O
Timer 1 + 2: O
SYS
Language: German *
Password: O
Battery Type: Alkaline
Overwrite SD: On
* The camera menu language is factory set to GERMAN. To change
the menu language, please go to chapter 08.3.
07.3 Main Menus
To adjust the settings for your purposes, switch the slide control (11)
to the middle position SETUP and press the menu button (09) .
The 3 main menus appear in the top left of the LCD display (08). The
selected main menu is highlighted in yellow :
Main menu CAM
Here you can adjust the camera settings. You can see the dierent
settings in chapter 08.1.
Main menu PIR
Here you can adjust the trigger settings. You can see the dierent
settings in chapter 08.2.
Main menu SYS
Here you can set the date/time, language, password etc. You can
see the dierent settings in chapter 08.3.
07.4 Menu navigation
•
Press the navigation buttons (12) or to select the desired
submenu. The selected submenu is highlighted in yellow:
CAM PIR SYS
Kamera Modus
‹
Foto
›
MENU
Exit Save
OK
•
Use the navigation buttons (12) or to select the desired setting.
•
To save your settings press the OK button (10) .
•
Press the menu button (09) to return to the home screen.