Specifications

2
English
Battery
As batteries only have a certain lifespan it is quite normal that call time and standby time
willdecreasesomewhatcomparedtothespecicationswhenthetelephoneisusedregularly.
Fully-chargedbatteries(10hourscharging)willlastforapprox.100hoursstandbytimeor
approx.10hourscalltime.Thesetimesapplyatnormalroomtemperature.
Full battery capacity will not be reached until the batteries have been charged 4-5 times.
The base unit has an automatic charging mechanism that prevents the batteries from being
overcharged or damaged due to prolonged charging.
Please note!
Use only original battery(2.4V 600mAh Ni-MH) and original power adapter (6V DC
th60-300mA & th65r-600mA). Risk of explosion if battery is replaced by an incorrect type. Dispose
of used batteries according to the instruction in your country. The base unit should not be located
close to other electrical equipment, in direct sunlight or near any other strong heat source! This is to
minimize the risk of any interference. It is normal for the device to become warm during charging
and this is not dangerous.
Base unit indicators
th60 th65r
7
Steady light while charging.Steady light while charging.. Y Illuminated on standby.
q
Flashes during calls and during ring.
On when new SMS* message received.
The display
* Only functions in certain countries.
In order to save the batteries, the display is very dark on standby, press
L
once to illuminate. During calls, use .
Icon Function
Shown when in range of base unit
Key lock activated.
Ring signal disconnected.
Alarm activated.
Speaker phone.
During calls.
Icon Function
Battery charge indicator.
New SMS* received.
New number received.
Message waiting Message indication*.
Only th65r:
New message on answer machine.
Flashes when memory is full.
Answer machine on.