Specifications

15
English
Settings in answer machine
1. Press Menu. Scroll to Answer machine. Press OK.
2. Scroll to Ans. Settings. Press OK.
3. Scroll to desired function, e.g. Answer Mode. Press OK.
4. Scroll to required setting. Press OK.
Answer Mode Select between normal answering function and answer only
(callerscannotleaveamessage).
Answer delay Select the number of rings before the answer machine responds
toincomingcalls(2,4,6,8,TimeSaver*).
Recording time Enterthemaximumrecordingtimeformessages.
Call screening This function in base unit is described elsewhere.
The Time Saver function answers calls after six rings, until the rst new message has been registered.
Then the answer machine switches to answering after approximately two signals. This is useful when
using remote control; if you call up the answer machine and there is no reply after four rings that
means there are no messages recorded and you can hang up before you are charged for the call.
Out of memory
The memory will store a total of 15 minutes of messages (including the outgoing
message).
When Message fullisshownorthebaseunitashesF,nonewmessagescanbe
receivedbeforeexistingonesareplayedbackanddeleted.
In that case, the telephone answer machine responds with the outgoing message for
Answer only.
Note: Delete old messages regularly to avoid lling up the memory!