Specifications

English

Base settings

Base PIN is 0000 on delivery.

1. Press Menu.

2. Scroll to Settings. Press OK.

3. Scroll to Base settings. Press OK.

4. Scroll to desired function e.g. Exchange code. Press OK.

5. Scroll to desired setting. Press OK.

Ringer The base unit’s ring signals can be set at several different levels.

HS priority You can decide whether all handsets should ring at once when there

is an incoming call, or if one handset should start ringing before the

others. You can set the number of ring signals for this function as well.

Dial mode Must be in tone in most countries.

Flash time Only for adaptation to international company switchboards. For most

countries, the setting is 100 ms.

Msg Wait Off To turn off the message indication manually.

System PIN YoucanchangethePINcode(0000ondelivery).

Exchange codeEnterthedigitthatobtainsanexternallineandthetelephonewill

insert a pause automatically when a number starts with that digit.

ECO mode When this function is enabled, less power is consumed when the handset

isincloseproximitytothebase.Ifyouareexperiencingproblemswith

the range, shut this function off. Furthermore, if you use one handset

only, the power consumption will also be lower during charging.

System reset Reset base unit.

All new handsets that are to use the base unit must be registered.

See also the Expanded Systems chapter for more information.

1. Press Menu. Scroll to Setting. Press OK.

2. Scroll to HS Settings. Press OK.

3. Scroll to Register. Press OK.

4. Scroll to the desired base. Press OK.

5. Enterthebaseunit’sPINcode(0000ondelivery).PressOK.

6. Hold down the base unit’s search button

until a beep is heard.

7. If the registration is successful the handset will return to standby mode within one

minute.