Specifications

10
English
Sound
1. Press Menu. Scroll to Sound. Press OK.
2. Scroll to desired function, e.g. Ringer. Press OK.
3. Scroll to desired function, e.g. Ring volume. Press OK.
4. Scroll to desired setting
8
/
9
. Press OK.
Ringer The handset’s ring signal can be adjusted.
Tones Canbeheardwhenpressingbuttons,lowbattery,conrmation/when
charging starts or when out of range.
Clock/Alarm
1. Press Menu.
2. Scroll to Settings. Press OK.
3. Scroll to Clock/Alarm. Press OK.
4. Scroll to desired setting. Press OK.
Alarm The activated alarm is indicated with on standby. When the alarm
goes off, an audio signal is heard for 30 seconds. Use Stop to switch it
off permanently. The volume is determined by the set ringer level.
Date/Time Setting of date/time is described in the Connection chapter.
Other settings
1. Press Menu.
2. Scroll to Settings. Press OK.
3. Scroll to HS settings. Press OK.
4. Scroll to required function e.g. Language. Press OK.
5. Scroll to desired setting. Press OK.
Direct call This function allows you to dial a predetermined number by pressing any
button (however not Optwhichallowsyoutodisconnectthisfunction).
Select base Only used in systems with more than one base unit.
Display Settingthecontrastandthetextdisplayedinstandbymode.
Language LanguagesettingsareexplainedintheConnection chapter.
Auto answer The handset answers incoming calls when it is lifted from the base unit.
Register To register a new handset, see separate description.
De-Register To deregister a handset from a base unit. System PIN is 0000 on delivery.
Handset reset Resetting the handset.