Specifications

9
English
Other info services
Mostusualoperator/extraservicescanbeaccessedviathemenuorwith
the menu buttons during a call. Some functions are pre-programmed but is
not certain that all functions will work on delivery as this will depend on the country of
installation/operator. You can change the codes that are sent, see below in this chapter.
The functions available will depend on your service provider.
Please note!
You may have to pay extra for some services, contact your service provider for more information.
Some services will not work unless you have contacted your service provider to activate them.
Busy number/call waiting
1. Connectanexternalcallandwaituntilthetimerisshown.PressOption.
2. Scroll to required service.
- CW accept Answer incoming call waiting (=
R
2
).
- CW reject Refuse incoming call waiting and send engaged tone (=R
0
).
- Auto callback When a number is engaged. When the number is free you will hear
a quick ring signal (=
5
).
3. Press OK.
Under inquiry/alternating/answered call waiting
Use the respective menu button:
- Brok Switching between two calls (=
R
2
).
- Conf Conference/three party call (=
R
3
).
Call Forwarding
1. Press Menu. Scroll to Oper. Service. Press OK.
2. Scroll to Call forward. Press OK.
3. Scroll to required service. Press OK.
4. Follow the instructions given in the receiver, speaker or the display.
Other services
1. Press Menu. Scroll to Oper. Service. Press OK.
2. Scroll to Functions. Press OK.
3. Scroll to required service.
- Call anonymous Withhold your number from recipient. The code for this service
must be programmed manually, see below.
- Call waiting Command to turn the call waiting service off or on easily.
- Network codes The codes supplied when you use the operator services can be
changed. The number for Message indication can also be programmed here.
4. Press OK. Follow the instructions given in the receiver, speaker or the display.