manual

5
English
Troubleshooting
Disconnectanyadditionalequipment,extensioncordsand
other phones. If the problem is resolved, the fault lies with
anotherpieceofequipment.
Check that all cords are undamaged and correctly
plugged in.
Make sure PHONE MODE
q

is selected on the
headset base.
Make sure the lifter control cable is connected to
q

on the headset base.
Make sure the correct termination is selected on the
headset base. Slide on the side of the headset base
fromAtoGuntilthedialtoneisclear.
Reset the headset base. Unplug the unit’s electrical
power. Wait for approximately 15 seconds, then plug
it back in. Allow up to one minute for the cordless
headset and headset base to reset.
If despite the above measures the device still doesn’t
work,contacttheplacewheretheequipmentwas
purchased for service. Don’t forget the receipt/invoice.
•
•
•
•
•
•