manual

2
English
Return the lifter to the same
position that you marked
before and press down.
Install hs1910dect as
described in the manual,
Option 1.
Connect the Lifter control
cable
q

(blue) to the
corresponding socket on the
headset base.
Remove the handset from
your telephone.
Press
q
on the headset
and listen for the dial tone.
Make sure the switch hook
presser is in its non-extended
position.
Adjust the motor back and
forth to set the switch hook
presser just above the switch
hook.
Press down on the lifter arm
until the switch hook presser
rmlytouchestheswitch
hook on the telephone. Then
slide the lifter arm height
control down one notch at a
time. Stop adjusting when
you hear the dial tone from
the headset or handset
earpiece.
Place the telephone handset
on the lifter arm.
Test to make sure the hook is
working by pressing the
q
button on the headset.
6.
7.
8.
9.
10.
11.
12.
13.
14.